Hoyt Pro Comp Elite Specifications

Below are the specs for the Hoyt Pro Comp Elite compound bow. This compound bow was modified by the Hoyt design team over years. Scroll down to find Hoyt Pro Comp Elite specs for all modifications.
4 versions (2014-2013), specs were changed
all versions (2014 - 2013)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2014 GTX cam | |||||||
| 2014 GTX cam | 8.125 " | 37.875 " | 24.5-31 " | 30-70 lbs | 305 fps | 4.8 lbs | 65% or 75% |
| Version: 2014 Spiral cam | |||||||
| 2014 Spiral cam | 7.625 " | 37.625 " | 24.5-32 " | 30-70 lbs | 315 fps | 4.8 lbs | 65% |
| Version: 2013 GTX cam | |||||||
| 2013 GTX cam | 8.125 " | 37.875 " | 24.5-31 " | 30-70 lbs | 305 fps | 4.8 lbs | 65% or 75% |
| Version: 2013 Spiral cam | |||||||
| 2013 Spiral cam | 7.625 " | 37.625 " | 24.5-32 " | 30-70 lbs | 315 fps | 4.8 lbs | 65% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- One riser, two target cams: the GTX for a smoother pull and a 65% or 75% let-off choice, or the Spiral X for more speed
- Adjustable Air Shox limb dampers slide, re-angle, or come off entirely with a set screw - tuning you do by hand, not by press
- Wide shoot-through riser window clears fletching whether the arrow tunes a touch inside or outside center
- Settles and holds on the spot with a tight, planted aim that rewards a disciplined shooter
- Selectable 65%/75% let-off on the GTX cam suits both long practice ends and a firm back-tension release
- The set screw on the adjustable Air Shox needs a firm bite - snug it down hard or it can creep up under the shot
- A short-valley target cam demands honest follow-through - break form and the miss is bigger, so stay in the shot to the wall