Athens Summit 7 Specifications
Below are the specs for the Athens Summit 7 compound bow.
2 versions (2021-2020), specs were not changed
all versions (2021 - 2020)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2021 | |||||||
| 2021 | 7 " | 30.5 " | 24.5-30 " | 30-70 lbs | 335 fps | 4.2 lbs | 80% - 90% |
| Version: 2020 | |||||||
| 2020 | 7 " | 30.5 " | 24.5-30 " | 30-70 lbs | 335 fps | 4.2 lbs | 80% - 90% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Exceptionally light in the hand - a 4.2 lb bow that carries like a mid-3 lb rig, easy to hold up through a long treestand sit
- Dead-in-hand shot with no felt hand shock or vibration and a quiet release - beyond-parallel solid limbs and factory LimbSaver rubber do the work
- Smooth draw into a deep, forgiving valley behind a 7-inch brace that holds steady and points itself on target
- Naturally balanced - settles on the target on its own and groups tight even shot bare-bow at close range
- Complete color customization with separate riser and limb colors, plus American-made GAS strings and a transferable lifetime warranty
- Soft drop-off into the deep valley - shooters used to a crisp flagship back wall can dial the draw stops in tighter to firm it up, and safety draw stops guard against over-rotation
- Draw-length changes need a module swap on a bow press rather than a home-adjustable rotating mod - set your exact half-inch draw with the shop before the made-to-order build