Darton Tempest E 3D LD Specifications
Below are the specs for the Darton Tempest E 3D LD compound bow.
2 versions (2022-2021), specs were not changed
all versions (2022 - 2021)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2022 | |||||||
| 2022 | 6.625 " | 36 " | 27-32.5 " | 40-70 lbs | 320-325 fps | 3.9 lbs | 85% |
| Version: 2021 | |||||||
| 2021 | 6.625 " | 36 " | 27-32.5 " | 40-70 lbs | 320-325 fps | 3.9 lbs | 85% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Reaches a true long draw - 27 to 32.5 inches on the adjustable Maverick-XT cam, covering the taller and longer-draw archers the standard 3D and indoor Tempests cut off
- Draw length adjusts on the cam itself, so you dial or change the setting without ordering and swapping modules
- Firm, defined back wall - the Maverick-XT cam locks up with a solid draw stop to pull into, and a limb stop is available for an even harder wall
- Forgiving, stiff chassis shared with the target line - the E-System cable roller and machined 7075 riser carry straight over from the rest of the Tempest family
- Light for a target bow at a published 3.9 pounds - well under its five-pound-class siblings, so an archer who wants a dead-still heavy hold may want to build mass back with a heavier stabilizer and weight setup
- Paint, not anodize - the family's painted finish can run slightly or lift under repeatedly applied grip tape, so seat accessories cleanly and leave any grip wrap in place once it is on