Darton Tempest E T Specifications
Below are the specs for the Darton Tempest E T compound bow.
2 versions (2022-2021), specs were not changed
all versions (2022 - 2021)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2022 | |||||||
| 2022 | 7.3125 " | 37.25 " | 26-31 " | 40-70 lbs | 310-315 fps | 5.2 lbs | 85% |
| Version: 2021 | |||||||
| 2021 | 7.3125 " | 37.25 " | 26-31 " | 40-70 lbs | 310-315 fps | 5.2 lbs | 85% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Holds dead still - the long 37.25-inch axle-to-axle, tall 7 5/16-inch brace, and E-System roller combine into a platform that sits calm under the pin and flatters a deliberate aim
- The thin, angled machined grip pushes the hand slightly forward and seats it the same way every time, which steadies the shot more than a taller vertical grip
- Rock-solid cable-stop back wall - the big flat pad meets the cable with almost no give, and the limb stop both firms it further and lets you tune let-off
- Smooth, humpless draw - the cycle builds to the wall with no peak to muscle over, so the shot process stays quiet and repeatable
- A little vibration reaches the hand at the shot because the grip is machined straight into the riser with nothing to absorb it - the bow itself stays still rather than jumping, and the stabilizer setup every spot archer already runs damps what is left
- Paint, not anodize - the family's painted finish can run slightly or lift under repeatedly applied grip tape, so seat accessories cleanly and leave any grip wrap in place once it is on