Bear Persist 33 Specifications
Below are the specs for the Bear Persist 33 compound bow.
2 versions (2026-2025), specs were not changed
all versions (2026 - 2025)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2026 | |||||||
| 2026 | 6.25 " | 33 " | 26.5-30.5 " | 45-70 lbs | 340 fps | lbs | 75% - 90% |
| Version: 2025 | |||||||
| 2025 | 6.25 " | 33 " | 26.5-30.5 " | 45-70 lbs | 340 fps | lbs | 75% - 90% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Longer 33-inch axle-to-axle makes it noticeably more stable and forgiving - the pin settles and holds steady at distance, out past normal hunting range
- Genuinely fast for a Bear hunting bow - 334 fps with a 350-grain arrow at 70 pounds, among the quickest Bear has produced
- Dead in the hand with minimal post-shot vibration - the Killer Wave and in-riser dampeners leave almost nothing to feel at the shot
- Deep tunability from the EKO cam - four-position let-off from 75 to 90 percent, rotating-module draw length, and an adjustable roller cable guard
- Fully integrated riser - Picatinny sight rail, sling slot, pull-up rope loop and bubble level built into the frame, with an IMS dovetail that accepts a clamp-in rest
- On the heavier side for the class - the machined riser and 33-inch frame carry some mass, which steadies aim but is worth weighing if you pack in long distances
- A small dump into the back wall at the 90 percent let-off, and the wall could be a touch firmer - dialing let-off down to 80 or 85 percent tightens both up