Hoyt Highline Specifications

Below are the specs for the Hoyt Highline compound bow.
4 versions (2025-2022), specs were not changed
all versions (2025 - 2022)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2025 | |||||||
| 2025 | 7.875 " | 36.5 " | 29-34 " | 40-70 lbs | 345 fps | 4.9 lbs | 80% or 85% |
| Version: 2024 | |||||||
| 2024 | 7.875 " | 36.5 " | 29-34 " | 40-70 lbs | 345 fps | 4.9 lbs | 80% or 85% |
| Version: 2023 | |||||||
| 2023 | 7.875 " | 36.5 " | 29-34 " | 40-70 lbs | 345 fps | 4.9 lbs | 80% or 85% |
| Version: 2022 | |||||||
| 2022 | 7.875 " | 36.5 " | 29-34 " | 40-70 lbs | 345 fps | 4.9 lbs | 80% or 85% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Long 36.5-inch axle-to-axle holds rock-steady at full draw - owners with long draws call it one of the most forgiving rigs they have shot
- Reaches a true 34-inch draw most bows cannot, so a big-wingspan shooter finally anchors without a cramped, steep string angle
- HBX Pro cam draws easy and rolls over smoothly - owners describe it as a very smooth, easy-pulling bow even at long draw settings
- Dead in the hand and very quiet - owners report zero hand shock and one of the quietest shots they have heard in a while
- Comes loaded with no corners cut - full In-Line Picatinny mounting and an included Short Stop stabilizer right out of the box
- Built around long draw, so at the short end of its range it gives up speed - shooters under about 31 inches will be faster and happier on a shorter bow
- Big and heavy at 4.9 pounds bare and close to 5.7 on the scale with the stabilizer - long-draw shooters handle it fine, treestand minimalists may want to heft one first
- Drawing right at the 32 to 32.5-inch module boundary loses a little speed on the longer module - pick the cam module deliberately at a shop to land on the faster side