Bear Execute 32 Specifications
Below are the specs for the Bear Execute 32 compound bow.
2 versions (2024-2023), specs were not changed
all versions (2024 - 2023)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2024 | |||||||
| 2024 | 6.5 " | 32 " | 26.5-30.5 " | 45-70 lbs | 340 fps | 4.6 lbs | 75% - 90% |
| Version: 2023 | |||||||
| 2023 | 6.5 " | 32 " | 26.5-30.5 " | 45-70 lbs | 340 fps | 4.6 lbs | 75% - 90% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
 Seller: eBay Price: $719.99 |  Seller: eBay Price: $849.99 |  Seller: eBay Price: $1054.70 |
Check Out Pros & Cons
Pros
Pros
- Holds like a target bow - the 32-inch axle and long 37-inch cam-to-cam settle the pin and forgive small form errors better than most hunting-length rigs
- Loses nothing to the shorter Execute 30 on speed - same 340 IBO, and a 350-grain arrow still clocked 323 fps on the chronograph
- Quiet and dead-in-hand - a measured 93.9 dB with almost no post-shot vibration, right at the low end of the meter
- EKO cam adjustability is the real draw - four let-off settings from 75 to 90 percent, module-based draw length, and a limb-stop or cable-stop back wall
- Flagship money now - a step up from the sub-$1,000 Bears of the past, so value-first buyers should know they are now cross-shopping Hoyt and Mathews
- Draw length tops out at 30.5 inches - despite the longer riser it will not fit 31-to-32-inch draws, so very long-draw shooters need to look elsewhere in the lineup