Bear Refine EKO Specifications
Below are the specs for the Bear Refine EKO compound bow.
2 versions (2023-2022), specs were not changed
all versions (2023 - 2022)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2023 | |||||||
| 2023 | 6.375 " | 33 " | 26.5-30.5 " | 45-70 lbs | 342 fps | 4.4 lbs | 75% - 90% |
| Version: 2022 | |||||||
| 2022 | 6.375 " | 33 " | 26.5-30.5 " | 45-70 lbs | 342 fps | 4.4 lbs | 75% - 90% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
 Seller: eBay Price: $750.00 |  Seller: eBay Price: $1000.00 |  Seller: eBay Price: $1800.00 |
Check Out Pros & Cons
Pros
Pros
- Long 33-inch frame and 6 3/8-inch brace settle the pin for a steady, forgiving hold on the longer shot
- Selectable 75 to 90 percent let-off set with a wrench, no bow press - dial your own holding weight at full draw
- Dead-in-hand, quiet shot measured around 90 dB from the enhanced VRS dampers and KillerWave limb pads
- Smooth draw that rolls into a rock-solid wall when you run the limb stop instead of the cable stop
- GRIZgrip nudges the hand into a repeatable, low-torque position, and the slim VersaGrip still ships in the box
- At the top 90 percent setting the hold can feel almost too light to control - dialing to 80 or 85 percent on the EKO module restores holding weight and a crisper break, no press needed
- Quiet but not the quietest bow Bear built - some owners notice a touch more sound than their other rigs, and a heavier 480 to 500 grain hunting arrow settles it further