Bear Resurgence LD Specifications
Below are the specs for the Bear Resurgence LD compound bow.
3 versions (2024-2022), specs were not changed
all versions (2024 - 2022)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2024 | |||||||
| 2024 | 7 " | 32 " | 25-32 " | 45-70 lbs | 310 fps | 3.9 lbs | 80% |
| Version: 2023 | |||||||
| 2023 | 7 " | 32 " | 25-32 " | 45-70 lbs | 310 fps | 3.9 lbs | 80% |
| Version: 2022 | |||||||
| 2022 | 7 " | 32 " | 25-32 " | 45-70 lbs | 310 fps | 3.9 lbs | 80% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
 Seller: eBay Price: $250.00 |  Seller: eBay Price: $400.00 |  Seller: eBay Price: $425.00 |
Check Out Pros & Cons
Pros
Pros
- Built for the long-draw shooter - the 25 to 32 inch draw range reaches a full 32 inches, fitting the tall, 6-foot-2-and-up hunter most value bows stop short of at 30 or 31 inches
- Dead-smooth single-cam draw with a forgiving 7-inch brace height - it rolls back without a grabby transition and holds steady on target, exactly what a long-draw shooter wants
- Machined aluminum limb pockets at a sub-$450 price - a rugged limb seat where most budget bows drop to composite
- Quiet and settled in the hand - KillerWave limb dampeners and a single string stop pull the shot down to around 97 decibels with little post-shot buzz
- Grows with the shooter - two 15-pound draw-weight modules and a draw floor all the way down to 25 inches, so the same bow fits a smaller-draw household member too
- As a single cam it trades speed for smoothness - around 273 fps on a hunting arrow, about 20 fps behind a flagship twin-cam; fine at hunting ranges, but a shooter wanting a flat long-range trajectory should look at a hybrid or two-cam bow
- Some owners have reported it needs a careful tune out of the box - a top-cam twist and a bottom-cam shim, and the bottom cam lean is worth checking so the string does not rub; a quick pro-shop setup before the first hunt sorts it