Bear Species EV Specifications

Below are the specs for the Bear Species EV compound bow.
4 versions (2025-2022), specs were not changed
all versions (2025 - 2022)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2025 | |||||||
| 2025 | 6.75 " | 30 " | 23.5-30.5 " | 45-70 lbs | 320 fps | 3.8 lbs | 80% |
| Version: 2024 RTH | |||||||
| 2024 RTH | 6.75 " | 30 " | 23.5-30.5 " | 45-70 lbs | 320 fps | 3.8 lbs | 80% |
| Version: 2023 RTH | |||||||
| 2023 RTH | 6.75 " | 30 " | 23.5-30.5 " | 45-70 lbs | 320 fps | 3.8 lbs | 80% |
| Version: 2022 RTH | |||||||
| 2022 RTH | 6.75 " | 30 " | 23.5-30.5 " | 45-70 lbs | 320 fps | 3.8 lbs | 80% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
Seller: eBay Price: $210.00 | Seller: eBay Price: $275.00 | Seller: eBay Price: $300.00 |
Check Out Pros & Cons
Pros
Pros
- Among the quietest bows in its class, settling into the low-90s dB thanks to KillerWave limb dampeners and a single string stop
- Light and compact for the woods - 3.8 lb bare on a 30-inch axle-to-axle, about 5.6 lb fully rigged as a ready-to-hunt package
- 80% let-off, raised from the 75% of Bear's earlier single cam, so you hold less weight through a long treestand sit
- Wide 23.5 to 30.5-inch draw plus a 15-lb weight spread covers short-draw women, growing shooters, and most adults from one bow
- Aluminum limb pockets and a made-in-USA build at a sub-$450 package price, where many budget bows drop to polymer
- The 80% back wall carries a little compliance and wants to creep forward - staying engaged and following through handles it, routine for a value single cam
- Top draw length stops at 30.5 inches, so 31 to 32-inch shooters are out - those archers should look to the longer-draw Bear Species LD instead