Bowtech SX80 Specifications
Below are the specs for the Bowtech SX80 compound bow.
3 versions (2025-2023), specs were not changed
all versions (2025 - 2023)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2025 | |||||||
| 2025 | 6.75 " | 34 " | 26-31.5 " | 70-80 lbs | 331 fps | 4.7 lbs | 80% |
| Version: 2024 | |||||||
| 2024 | 6.75 " | 34 " | 26-31.5 " | 70-80 lbs | 331 fps | 4.7 lbs | 80% |
| Version: 2023 | |||||||
| 2023 | 6.75 " | 34 " | 26-31.5 " | 70-80 lbs | 331 fps | 4.7 lbs | 80% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- A genuinely smooth pull for an 80-pound peak bow, thanks to the mild DeadLock cam and Comfort FlipDisc setting
- Very quiet, low-vibration shot with the twin Orbit Dampeners doing real work at release
- Solid, planted hold from the 34-inch axle-to-axle frame and a low-torque Clutch grip that resists steering the shot
- Heavy-arrow momentum built for deep penetration on big game, launching ~480-grain shafts near 300 fps at full weight
- Press-free DeadLock tuning and rotating-module draw-length changes make it unusually easy to set up and keep in tune
- Not a speed bow - it trades top-end fps for the smooth 80; shooters chasing flat trajectory should look at a faster platform like the Bowtech SR350
- An 80-pound-only bow with 10 pounds of limb-bolt backdown, so archers who want a lighter 60 or 70 setup are better served by the SS34 on the same chassis