Mathews Lift XD Specifications
Below are the specs for the Mathews Lift XD compound bow.
Version: 2025
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2025 | |||||||
| 2025 | 6.75 " | 33 " | 32-33.5 " | 40-75 lbs | 363 fps | 4.31 lbs | 80% or 85% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
 Seller: eBay Price: $1049.99 |  Seller: eBay Price: $1249.98 |  Seller: eBay Price: $1300.00 |
Check Out Pros & Cons
Pros
Pros
- Purpose-built for 32 to 33.5 inch draw lengths, filling a long-draw gap most flagships leave open by capping near 31 inches
- Fast for a long-draw hunting rig - real chronograph readings land near 315 fps with a 456-grain arrow and 343 fps with a 355-grain arrow
- Very quiet, measured at 79 dB in hands-on testing, with almost no post-shot movement or hand shock at full draw
- Press-free Limb Shift tuning gets a bare bow paper-tuned in about ten minutes with a wrench, no bow press needed
- Draws smoother than a maxed-out standard bow for edge-of-range shooters, and stays well balanced despite the 33-inch, 4.31-pound frame
- Unusable below a 32-inch draw - a hard fit boundary, so confirm your draw and step down to a Lift X 33 or Lift RS if you measure shorter
- The BOND grip is hand-fit dependent - some shooters love it, others prefer a flatter aftermarket grip like the UltraView B-Real 2.0, so try the three profiles first
- Long-draw archers shoot long arrows, and the stock Bridge-Lock quiver runs a touch short so tips can sit past the limbs - a longer or aftermarket quiver solves it