Bowtech Rascal Specifications

Below are the specs for the Bowtech Rascal compound bow. This compound bow was modified by the Bowtech design team over years. Scroll down to find Bowtech Rascal specs for all modifications.
4 versions (2005-2002), specs were changed
all versions (2005 - 2002)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2005 | |||||||
| 2005 | 7.625 " | 24.75 " | 20-25 " | 10-40 lbs | 246-254 fps | 2.188 lbs | 65% - 80% |
| Version: 2004 | |||||||
| 2004 | 7.25 " | 24.5 " | 19-25 " | 10-40 lbs | 256-262 fps | 2.0 lbs | 65% or 80% |
| Version: 2003 | |||||||
| 2003 | 7.25 " | 24.5 " | 19-25 " | 10-40 lbs | 256-262 fps | 2.0 lbs | 80% |
| Version: 2002 | |||||||
| 2002 | 7.5 " | 24.375 " | 19-25 " | 10-40 lbs | 256-262 fps | 2.0 lbs | 65% - 80% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Built to grow with the child - BowTech sold upgrade limbs, cam, and strings, with a low-cost factory retrofit that re-limbs the bow as the kid gets bigger instead of making you buy a new one
- Featherweight at about 2.2 pounds, so a small child can actually hold it up, aim it, and hold steady long enough to learn good form
- Wide span for a youth bow - roughly 10 to 40 pounds of draw weight and a 19-to-25-inch draw reach from a first-timer up to a pre-teen
- Candy-colored finishes like SourApple, BubbleGum, and RazzelBerry are chosen for the young shooter, not the parent - a bow a kid wants to pick up
- The 246-to-262 fps speed is rated at a youth 40-pound, 25-inch, 200-grain setup, not the adult IBO standard, so judge it as a learning bow rather than cross-shopping it on fps against grown-up compounds
- Long discontinued, so the grow-with-me upgrade limbs and modules are now hard to source - a used buyer should confirm the right parts are available or plan on a custom string and a pro-shop setup