Mathews Classic Specifications
Below are the specs for the Mathews Classic compound bow.
4 versions (2007-2004), specs were not changed
all versions (2007 - 2004)
specific version
specific version
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2007 | |||||||
| 2007 | 7 " | 36 " | 27-31 " | 40-70 lbs | 310-312 fps | 3.6 lbs | 80%/65% |
| Version: 2006 | |||||||
| 2006 | 7 " | 36 " | 27-31 " | 40-70 lbs | 310-312 fps | 3.6 lbs | 80%/65% |
| Version: 2005 | |||||||
| 2005 | 7 " | 36 " | 27-31 " | 40-70 lbs | 310-312 fps | 3.6 lbs | 80%/65% |
| Version: 2004 | |||||||
| 2004 | 7 " | 36 " | 27-31 " | 40-70 lbs | 310-312 fps | 3.6 lbs | 80%/65% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Check Out Pros & Cons
Pros
Pros
- Single-cam SoloCam design (MaxCam) with no dual-cam timing to synchronize - simpler to tune and consistent shot to shot over the long haul
- Light 3.6-lb mass on a full 36-inch frame that carries easily through all-day hunts and long treestand sits
- Forgiving to hold - the tall 7-inch brace paired with the long 36-inch axle-to-axle steadies the pin for shooters still grooving their form
- Built around two quieting technologies, Harmonic Dampers and String Suppressors, aimed squarely at a calm, low-noise shot
- The MaxCam sets draw length by cam/module rather than a rotating on-the-fly module - a shooter who changes draw length often should confirm their exact length up front, since a change means a cam or module swap
- As a 2004-2007 model it is a used-market buy today - worth a fresh set of strings and cables and a quick pro-shop once-over before hunting it