Mathews Lift 33 Specifications
Below are the specs for the Mathews Lift 33 compound bow.
Version: 2024
| Version | Brace height | Ata length | Draw length | Draw weight | IBO speed | Mass weight | Let-off |
|---|---|---|---|---|---|---|---|
| BH | AtA | DL | DW | IBO | Wght | LO | |
| Version: 2024 | |||||||
| 2024 | 6.5 " | 33 " | 26-31.5 " | 45-80 lbs | 343 fps | 4.26 lbs | 80% or 85% |
| BH | Brace height |
| AtA | Axle-to-Axle length |
| DL | Draw length |
| DW | Draw weight |
| IBO | IBO speed |
| Wght | Mass weight |
| LO | Let-off |
What do you want to do next?
Compare prices
 Seller: eBay Price: $949.99 |  Seller: eBay Price: $949.99 |  Seller: eBay Price: $957.50 |
Check Out Pros & Cons
Pros
Pros
- Won the decibel-meter shootout on multiple independent tests, reading about 73 dB three feet from the shot - quieter than the V3X and Halon X and about as dead-in-hand as a hunting bow gets
- Drives real hunting speed off an easy draw - 310 fps with a 400-grain arrow and 292 fps with a 450 at 70 lb / 30 inch, from one of the smoothest speed-bow draws Mathews has built
- Genuinely light for aluminum at roughly 4.3 pounds, undercutting many carbon rivals while giving the long riser more mass to plant the pin
- The 33-inch riser runs nearly the full axle-to-axle length, so the bow holds like a target rig - the pin floats and settles instead of chasing the target
- SwitchWeight-X modules set draw length, poundage, and let-off together, so one bow spans 55 to 80 pounds and shifts fit season to season without a re-limb
- Some early-2024 RPD limbs splintered - Mathews' indefinite pass-down warranty covers the limbs even on a used bow, swaps the full set in about a week or two, and reports the fault resolved on current production, so new or used is protected
- The valley is a touch short and the cam wants to keep going, so pull-through shooters staying leaned into the firm wall are rewarded - anyone who likes a long, relaxed valley may want to shoot one first
- The stock Engage grip is rounded and full for a performance bow - some owners swap to Mathews side plates or an aftermarket grip, an easy, inexpensive change if the factory shape does not suit your hand